Click on each item to learn more about the features that make Redi-Rail so unique.

An "I"-Beam shaped rung provides a great strength-to-weight ratio. The fastener hole is designed to provide maximum grip for the fastener threads.

Rung Section Properties and Load Capacity

Back To Top

Rung Fastener Features:

• ¼"-20 threads and a hex head sized to fit any standard 3/8" wrench or socket.
• Washer head designed to allow the fastener to be torqued to high values (18 ft/lbs.) without stripping.
• Made from heat-treated carbon steel and coated with chromium zinc to withstand up to 400 hours of salt spray.
• Load Testing - Pullout from rung tested at over 3000 lbs.

The holes throughout the Redi-Rail system perform many different functions:

• Act as holes for splice plate hardware.
• If the tray must be field-cut, the tray may be cut through the center of a hole. This allows a splice plate to be attached to the next set of holes without field drilling.
• Allow rungs to be repositioned.
• The hanger rod bracket may be attached at any open bottom hole.
• Allows easy attachment of accessory items requiring ¼" hardware (or smaller) such as conduit clamps, electrical boxes, wire basket runway, bonding jumpers, etc.

The hanger rod bracket speeds installation:

• Allows the installer to attach brackets into any open hole at the bottom of the side rail.
• Allows the brackets to be mounted offset from one another (not directly across as with a trapeze) for low-load applications. This allows the installer to work around existing obstructions.
• May be used for hanging Redi-Rail tray at angles up to 45° since the single-bolt attachment allows the
  tray to swivel to the desired vertical
  position.
• Tested successfully for tray loads
  over 115 lbs./ft.

Redi-Rail splice plates:

• Allow the rigid connection of Redi-Rail straight sections and fittings.
• Listed as a UL grounding conductor.
• Tested successfully to meet or exceed tray load capacity (including splices will not degrade the load carrying capacity of the tray system).
• Included with all Redi-Rail straight sections and fittings.

Flex Connectors:

• Allow adjustment in a Redi-Rail tray run both horizontally and vertically.
• Horizontal adjustment range: 0° to 90°
• Vertical adjustment range: -15° to 15°
• Two options available:

1. Pair of Flex Connectors
2. Pair of Flex Connectors with Support Rung

• Listed as a UL grounding conductor.

• Aluminum construction.
• Available in 3, 4, 5, and 6 inch fill depths.
• Available in 6, 9, 12, 18, 24, 30, and 36 inch widths.
• Available in Ladder, Ventilated, and Solid Bottom options.
• Full line of fittings available.
• Meets and exceeds NEMA 12B load classification requirements (75 lbs./ft. on a 12 ft. span with a safety factor of 1.5).
• Stainless steel hardware available upon request.

For additional information, please call B-Line customer service at (800) 280-7994. To request or download the Redi-Rail Cable Tray System catalog, click on either of the buttons below.

Home | About Us | What's New | Products | Library | Design Center |
Services | Employment | Contact Us | Search